Partitions.my · Partition Contractor
Prepare enquiry

Gypsum Drywall Partition Installation

Compare gypsum drywall for homes, offices and shops in Malaysia. Calculate gross and net area and check quote inclusions for framing, insulation, doors and paint.

Prepare enquiry
Gypsum office divider during a refit
Illustrative setup · Radia Bukit Jelutong

Partition setup examples

Radia Bukit Jelutong

Illustrative setup
Gypsum office divider during a refit

Gypsum office divider during a refit

Confirm where the timber door frame and any backing for wall fittings will go before the remaining boards and finish are installed.

View area guide

Gypsum drywall

Illustrative setup
Open stud framing around a doorway before drywall close-up

Open stud framing around a doorway before drywall close-up

Gypsum drywall

Illustrative setup
Finished gypsum administration room and timber swing door

Finished gypsum administration room and timber swing door

More examples for this service
Open steel stud frame for a new office wall
Open steel stud frame for a new office wall
View the gallery

Compare the options

Standard internal drywall

Use for an opaque, non-load-bearing divider in a dry office or shop. Specify wall height, board layers, stud assembly and the intended paint finish. A drywall wall can run beside glazing if some borrowed light is needed.

Acoustic wall assembly

For interview rooms, specify the wall and door together. Compare board layers, cavity infill, perimeter sealing and the ceiling junction with the documented system. Check ducts and socket locations for paths between rooms.

Impact-resistant wall or local reinforcement

For display brackets, cabinets or frequent trolley contact, tell the installer what will be mounted and where before boards close. Agree the support or protective finish for those locations. Ask separately about the door jamb and skirting in busy areas.

Walls with moisture or fire requirements

Specify the site condition and the performance called for in the project documents. A board label alone does not establish a wall assembly’s performance. Have the project designer or installer confirm details at doors, junctions and openings before ordering.

Sequence the work before closing the wall

Mark unfinished and finished wall positions on the same drawing. Verify the door swing, frame depth and what happens at the suspended ceiling. Coordinate electrical boxes, data outlets, heavy fittings and any cavity infill while the framing is still accessible.

Agree which crew checks and photographs the open wall before boarding the second face. Set expectations for joint finishing, sanding, primer, paint, skirting and touch-ups to surrounding surfaces. In an occupied office, agree how each area will be isolated and when finishes can dry before people return.

Worked example for a 6 m wall with one door

A 6 × 2.7 m wall measures 16.20 m² gross. Subtracting a nominal 0.9 × 2.1 m door gives 14.31 m² net for one face. If the same area is boarded on both faces, one layer per face gives 28.62 m² of net board coverage across the two faces. Board buying quantities also depend on cuts, waste and the specified number of layers.

Check whether the price is per m² of gross wall, net wall or a separate board quantity. Ask for the door set, fixings for mounted items, cavity infill, plaster finishing, paint, services, demolition and waste disposal as separate lines. A quote for board and frame has a different scope from a ready-to-occupy room.

Quote checklist

Add checklist to quote brief

Common questions

Will the drywall quotation include painting and doors?

Ask for separate lines for framing and boards, joint finishing, painting, doors and electrical work. That makes it easier to compare bids and confirm responsibilities before work starts.

Is gypsum partition the same as drywall?

Gypsum board is a common lining used in drywall. The full partition also includes the framing, fixings, joints and any specified insulation or additional layers.

Can I hang a TV or wall cabinet on drywall?

Tell the installer the fixture weight, bracket and position before boarding. They can specify a suitable support detail and coordinate the cable or socket location at the same time.

Should the wall continue above the suspended ceiling?

That depends on the room use and the specified wall system. Check the void above the ceiling, the available supports and any acoustic or fire requirement with the project designer before finalising the wall head.

Is a per-square-foot rate enough to budget the job?

Use the rate with a stated measurement basis. Then add separately priced items such as doors, finish, backing, services, delivery or weekend access where the quote excludes them.

Compare related options

Office partitions

Plan meeting rooms, quiet workspaces and office divisions. Compare glass, drywall and demountable systems in a single site brief.

Fire-rated systems

Request a review of a fire-rated partition brief when the building drawings or consultant specify a tested system.

Moisture-resistant walls

Discuss board systems for humid, frequently cleaned or more demanding interior spaces.

Home room partitions

Create a bedroom, study or private corner with a drywall, glazed or freestanding divider. Compare options for Malaysian condos, apartments and terrace homes.

Glass partitions

Compare framed, frameless-look and frosted office glass in Malaysia. Check door options, speech privacy and what goes into an installation quote.

Partition Pricing and Quote Guide

Compare what office partition, temporary event room and exhibition booth quotes cover. Use the checklists to prepare a clear scope.

Prepare your project brief

Start with the location, rough measurements and the date you need the space ready.

Prepare enquiry